nukeem
Been Here A While
Posts: 793
|
Post by nukeem on May 28, 2014 12:14:08 GMT -5
Great deal Bob!!! I love my yard sales too. These are the ones that were on my 74 when I got it, and they are rough. The front ones are a different design and non chrome??? Any ideas about them? Gary
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 28, 2014 12:58:07 GMT -5
Mine are 14x10 and 14x7. They are universal. They are the ones off one of Tom's many, many, parts cars. I think they came off that rusty 71 SE. The worst one cleaned up pretty good. I ran out of polish, so I haven't touched the other three. What type lug nuts and thingamajigs do I need to mount them on the Charger? I think it's these. They should come with both center and offset washers. www.summitracing.com/parts/crr-kn2121/overview/
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 28, 2014 13:39:59 GMT -5
Great deal Bob!!! I love my yard sales too. These are the ones that were on my 74 when I got it, and they are rough. The front ones are a different design and non chrome??? Any ideas about them? Gary View AttachmentView AttachmentLooks like someone used a sandblaster on two of the rims in an effort to de-chrome them. They taped around the inside of the rim to keep from blasting away the chrome in the outer part. They were probably intending to paint the spoke part of the rim. A low powered sandblaster will knock the chrome down enough so paint will stick to it. That would be my guess, only because I've done it.
|
|
DynoDave
CO-ADMINISTRATOR
Motown Mopar-Wizard
Posts: 11,169
|
Post by DynoDave on May 28, 2014 14:07:13 GMT -5
No, those use a very SPECIAL lug nut. Did the old guy forget to mention they aren't available any more? But he has some he'll sell you....for $300.00.
|
|
purplecharger
Been Here A While
collecting parts for the next one
Posts: 768
|
Post by purplecharger on May 28, 2014 18:56:31 GMT -5
Are you saying you have uni-lug openings? ? If so you need to find the adapter pieces to go in the slots Bob they are different openings in the slots depending if you were brand x y or z then Mopar
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 29, 2014 3:29:00 GMT -5
Are you saying you have uni-lug openings? ? If so you need to find the adapter pieces to go in the slots Bob they are different openings in the slots depending if you were brand x why or z then Mopar I found a set, 5 lug nuts and spacer adapters on Summit for $8.99
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 29, 2014 5:01:01 GMT -5
No, those use a very SPECIAL lug nut. Did the old guy forget to mention they aren't available any more? But he has some he'll sell you....for $300.00.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 29, 2014 5:02:58 GMT -5
Great deal Bob!!! I love my yard sales too. These are the ones that were on my 74 when I got it, and they are rough. The front ones are a different design and non chrome??? Any ideas about them? Gary View AttachmentView AttachmentDepending on the cost you might want to get them checked to see if they are candidates for powder coating. Nice rims.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 6, 2014 7:00:35 GMT -5
|
|
DynoDave
CO-ADMINISTRATOR
Motown Mopar-Wizard
Posts: 11,169
|
Post by DynoDave on Jul 6, 2014 8:44:57 GMT -5
I like 'em! Then again, I always was a fan of that wheel.
|
|