|
Post by 71jack on Jul 5, 2014 19:44:35 GMT -5
What is the best way to remove drIp rail molding? Got everything off my 72 coupe today except them. Ready to cut off qtrs and send to media blast as soon as I figure this out. Thanks in advance for any help you can give me.
|
|
Archie
Forum Regular
Posts: 258
|
Post by Archie on Jul 5, 2014 22:57:12 GMT -5
Mine came off easy, just start at the back end and sorta wiggle it over the edges along with a small screwdriver behind it and very carefully persuade it off.
|
|
|
Post by 1ol74charger4me on Jul 9, 2014 22:24:27 GMT -5
Years ago I heard of using a bottle opener or can opener. I usually use a paint stick and pull out on the bottom edge starting at the back. The wood is more forgiving to the metal edge yet strong enough to pull the molding off. Sometimes it helps to soak the area with a penetrant like PB Blaster to help loosen the dirt and rust that grows behind it.
|
|