|
|
Post by Nacho-RT74 on Sept 25, 2015 8:20:49 GMT -5
a friend of mine wants to install a Go wing on his car. I know we have talked about this ( sponsored by BOB )... are actually the Mustang go wings same dimiensions than those overpriced "mopar repro Chrysler licensed" wings ?
what are the differencdes? It seems the pedestals shape are kinda diff shape, but what about dimmensions ( wing itself and pedestals width position )
|
|
glr
Settling In
Posts: 204 
|
Post by glr on Sept 25, 2015 22:06:27 GMT -5
I can tell you from experience... that the Mustang wing and some of the cheaper "Go wings" out there have a narrower distance between the pedestals. The chrysler spoilers have a wider stance from pedestal to pedestal.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 27, 2015 7:28:41 GMT -5
I used the same locations in my trunk lid to mount the mustang wing. It was about 1/8th difference on each side. I forget the dimensions length and width.
|
|
glr
Settling In
Posts: 204
|
Post by glr on Sept 27, 2015 15:03:40 GMT -5
The repro Go-wing that the customer bought and had me install was about an inch or so narrower than the factory 71 up style wing. I had to move the trunk mounting brackets inboard quite a lot from the factory locations.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 27, 2015 17:34:32 GMT -5
The repro Go-wing that the customer bought and had me install was about an inch or so narrower than the factory 71 up style wing. I had to move the trunk mounting brackets inboard quite a lot from the factory locations. 69 and 70 Mustang wings and the 71-73 Mustang wings are two different pedestal widths. One is to narrow, RS2 and one fits just about right RS1. For the RS1 I used the same trunk holes as the go-wing. Read this thread. wichargerguy.proboards.com/thread/10433/rear-spoilers
www.cjponyparts.com/catalogsearch/result/?q=rs1
|
|
glr
Settling In
Posts: 204
|
Post by glr on Sept 27, 2015 17:52:24 GMT -5
Well, I don't know which spoiler part number that the customer bought. He gave the spoiler to me with out a box.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 27, 2015 18:25:36 GMT -5
Well, I don't know which spoiler part number that the customer bought. He gave the spoiler to me with out a box. Water under the bridge now. Later |
|
|
|
Post by Nacho-RT74 on Sept 29, 2015 13:36:49 GMT -5
actually is for a Dart's friend, but per FPAP website all PNs are the same for any Mopar body but the reinforcement bracket ( of course, diff deck lid frame shapes ). So I guess all Mopars got same width. Will check on this later, have to go to job.
|
|
|
|
Post by Nacho-RT74 on Sept 30, 2015 15:45:45 GMT -5
|
|
