|
Post by 71se3834v on Apr 22, 2016 21:54:35 GMT -5
I think my spring compressor is the K-D brand and looks sorta like a 2 jaw puller with a star wheel on top. Had it for decades though not used that much. Just loaned it to Dino on DC.com to replace his seals. If I weren't about to hit the bed I'd go take a pic and post it.
|
|
DynoDave
CO-ADMINISTRATOR
Motown Mopar-Wizard
Posts: 11,163
|
Post by DynoDave on Apr 23, 2016 12:43:30 GMT -5
Like this. That's what I have as well. K-D
|
|
gip63
Forum Regular
Posts: 257
|
Post by gip63 on Apr 24, 2016 15:23:38 GMT -5
I wanted to mention when I went to put my mopar performance valve covers on that I have had trouble getting passenger side to seat down like its supposed to and have had a leak. I got under the car with a light trying to figure out what the problem was and noticed something, it looks like on the back bottom corner, the square corner of the head sticks out just a hair too much and the cover doesn't want to seat all the way down keeping it from sealing against the gasket. Also ya got to make sure bolts aren't too long and bottom out before it gets tight, that was part of my problem. This is on a 440 by the way and was wondering if anyone else has had similar issues?
|
|
DynoDave
CO-ADMINISTRATOR
Motown Mopar-Wizard
Posts: 11,163
|
Post by DynoDave on Apr 24, 2016 18:34:28 GMT -5
Interesting find. I've not seen that before.
|
|
|
Post by 71se3834v on Apr 29, 2016 22:08:29 GMT -5
Like this. That's what I have as well. K-DYep, that be it.
|
|