|
Post by brbluesman on Dec 13, 2018 19:06:57 GMT -5
I'm working on my interior and I've found most of the interior upper door panels (used) from folks on ebay. I haven't found the upper driver's side panel yet. I need a white, Brougham panel with manual window to finish. I've tried for awhile now on ebay but haven't had any luck. I have the bottoms new from Classic Industries but can't find new or used upper. Anyone know where I might look next ?
|
|
|
Post by odzking on Dec 13, 2018 21:29:10 GMT -5
|
|
|
Post by Nacho-RT74 on Dec 14, 2018 9:15:45 GMT -5
question.... are the lowers you got PALCO ones ?
as told, 72s won't work because 71/72 doors are higher on rear... needs to be 73/74, aside the lowers ( lowers are all 71/74 the same )
they usually float on once in a while... just need patiente.
with or without mirror joystick hole ?
Manual or power window doesn't change anything.... diff here is on lowers
|
|
|
Post by brbluesman on Dec 15, 2018 20:16:31 GMT -5
The lowers I bought from Classic Industries. The uppers are Brougham with the mirror joystick hole. I've got a decent one for the passenger side, just trying to match it with a good condition, used one for the drivers. I've been watching Craigslist and haven't seen one in a long time that's a white one in decent shape.
|
|
|
Post by odzking on Dec 16, 2018 11:55:07 GMT -5
White is tough, even good ones used are faded as mine are and next to the white lower panels the color looks off. Then there is the silver trim that is almost always peeling. I will keep an eye open as I always do during the summer. Also that swap meet is coming up in Detroit if you can get someone to look for you.
|
|
|
Post by Nacho-RT74 on Dec 16, 2018 22:34:55 GMT -5
The lowers I bought from Classic Industries. Yes, but manufacturer is Palco or Accuform? ( palco ones get brand molded on back ). As far I know those are the only two manufacturers for those.
|
|
|
Post by odzking on Dec 17, 2018 10:32:22 GMT -5
The lowers I bought from Classic Industries. Yes, but manufacturer is Palco or Accuform? ( palco ones get brand molded on back ). As far I know those are the only two manufacturers for those. I always forget, which is the better Nacho, and where to get?
|
|
|
Post by Nacho-RT74 on Dec 17, 2018 14:53:34 GMT -5
|
|
|
Post by brbluesman on Dec 19, 2018 15:45:09 GMT -5
All Palco had was lowers. Odzking, that's exactly what I was worried about. The new bottoms are much brighter white than the cleanest used upper white ones could ever be ! So...Anyone ever had the uppers reapholstered, eiter to original or custom for their 74 Brougham ?
|
|
|
Post by odzking on Dec 20, 2018 9:30:00 GMT -5
Yes, I have been scouting for a nice pair of door panels (used) but not black. Lighter colors tend to get quite chalky. Then I will paint them with an off white to match my uppers, about the only thing you can do.
|
|