|
Post by jogomez90 on Feb 16, 2019 17:33:27 GMT -5
Here's the wire. It goes to one plug per each pair of headlights. What's it for?
|
|
|
Post by Nacho-RT74 on Feb 16, 2019 19:21:17 GMT -5
Purple(violet) traced white... LOL
Low beams. It must reach outer beams
|
|
|
Post by Nacho-RT74 on Feb 16, 2019 19:22:30 GMT -5
Red traced white is high beams ( all 4 headlights )
Green traced red is horns. One on each side.
|
|
|
Post by jogomez90 on Feb 16, 2019 19:47:10 GMT -5
Haha my bad! Thanks for the correction. Neither of the headlight plugs has a red traced white wire. Is that normal? The high beam seems to only have two solid red wires going in, one from the low beam and the other from the harness.
|
|
|
Post by Nacho-RT74 on Feb 17, 2019 8:01:06 GMT -5
I can be wrong on the red taced white or red solid? LOL. well, is red and is the only red on harness ( except for the one what gets the fuse link. )
Headlights get on esch side one 2 ways plug and one 3 wats plug. 2 ways plug gets red for highs and ground to feed inner beam. 3 ways feeds outer beam being purple traced white for lows, red for high and black for ground.
I recall being traced too like the purple, but its on diagrams. Anyway, thats the only red around.
( editing... confirmed, high beams is solid red, not traced )
|
|
|
Post by jogomez90 on Feb 17, 2019 13:27:31 GMT -5
Okay... that solid red makes sense. Nacho,can you tell me if the fender mounted turn signals plug into the forward light harness? I don't see a plug on this harness or spliced wires where they once were
|
|
|
Post by Nacho-RT74 on Feb 17, 2019 17:37:40 GMT -5
My car didn't have them neither the provision for them so I simply spliced the power from turning signal wire at parking light plugs.
Got the wire with plug from a lates 70s Mopar harness I bought at a Junkyard. Plug and wire was long enough to splice the plug and related wire straight to the parking light plug
|
|