|
Post by moparbob on Aug 8, 2009 18:46:11 GMT -5
Need a few really simple parts. On the wipers on a 73 charger hardtop,, there is a (plastic??) bushing and a clip on the arm that comes from the motor to the drivers side wiper.
I could use those if anybody knows where I can get them. Have plenty to trade if you want to do it that way too.
Thanks!
|
|
|
Post by Nacho-RT74 on Aug 9, 2009 12:37:13 GMT -5
it could be one of this: something that it calls PARKING CAM..., just 2 speeds setup www.bradsnosmopar.com/nosmop70wwip.htmlsome time ago was still available at Mopar dealers as my knowledgment OR JUST A SMALL bushing like this ( used on both 2 and 3 speeds assemblied just in diff parts of linkages ): and if thats the case, they should be around at andy parts dealers shop ( if they are down here I can't think they are not up there ?. Some of them are holed to pass through the stud and use the clip. The ones on pic are simply clip on kind that COULD IT BE MODIFIED to pass through and fit the retainer clip, however without the modification, the stud will clip on. Lenght of stud could it be a problem on that to make it work like a clip on assembly.
|
|
Beaker
New Member
'74 Charger SE Brogham 400BB
Posts: 35
|
Post by Beaker on Apr 4, 2015 17:02:16 GMT -5
I saw this is old post but I found similar parts off ebay for a fraction of that sites price. I just cant find any diagrams to show me how these are installed. This pic I have are of the parts I got. If anyone happens to know the order, picture or a diagram of installation of these would be greatly appreciated.
|
|
|
Post by Nacho-RT74 on Apr 4, 2015 21:53:12 GMT -5
|
|
Beaker
New Member
'74 Charger SE Brogham 400BB
Posts: 35
|
Post by Beaker on Apr 5, 2015 19:13:27 GMT -5
Thanks Nacho, I got a better idea what I have now and its a 3 spd motor that doesn't require the cam. So now I got a cam I tried for the heck of it for $30 with shipping is all I paid if someone wants to try it. Part#2809040, says its for 68-70 B bodies but looks an awful lot like 71-74's maybe. The pics from previous are them outta the original pkg and below are measurements of it. I just need to get a retainer clip and figure out if theres something needed behind that clip onto the short offset wiper drive arm.
|
|
|
Post by Nacho-RT74 on Apr 9, 2015 10:13:05 GMT -5
3 speeds requires a diff crank
parking system it's build into the motor
that pic sure does it look to be a 71 and lates B assembly ( same as E bodies ).
About parts required for EVERYTHING, EVERYTHING it's on the link I posted.
Retaining clips are being sold by units on ebay
|
|