|
|
Post by akcharger on Feb 17, 2016 10:13:40 GMT -5
Where is the part number for the hood found??
|
|
|
|
Post by jacobrobert on Dec 31, 2016 7:08:24 GMT -5
I don't have pictures of everything, but here are a few. I'll not bother to show the flat hoods, except to say that the cowl louver scheme mentioned below applies to them as well. My '72 Bulge hood.  See the gap in the louvers at the cowl. That makes this a '72. A '71 would have no gap...all louvers. A '73 Bulge hood. [img src="http://img.photobucket.com/albums/v517/DynoDave/Charger/73BulgeHood010-1_zps2664ca04.jpg" |
|
|
|
Post by jacobrobert on Dec 31, 2016 7:10:10 GMT -5
I need a 72 dodge charger ET bulge hood for a restoration need a steel hood call 4436150287 Barry
|
|
|
|
Post by akcharger on Jan 20, 2017 23:03:40 GMT -5
where is the part # on the hood found? anyone??
|
|
|
|
Post by charger440sixpac on Jan 20, 2017 23:56:07 GMT -5
As far as I know, no part number is stamped on hood panel from factory. Over the parts counter replacement parts were usually stamped in white paint in various locations on the underside of the hood.
|
|
|
|
Post by Nacho-RT74 on Jan 21, 2017 9:48:52 GMT -5
 this is an example. Randombly stamped on panels. This PN is a 73/74 right side door skin. SOMETIMES ( but not common ) this stamping is deep enough to still be able to survive to the paint, specially because being on inner parts the finish on this areas is not really important when painting 
|
|
|
|
Post by odzking on Jan 21, 2017 12:04:45 GMT -5
 with 440SixPac as stated. In most cases, part numbers are not generally stamped on sheet metal parts original to the car. Some original pieces will have SO# or vin. IF there is a part number such as posted above it is most likely a replacement factory part. Just about all replacement sheet metal has a stamped or painted part number on it at the dealership back in the day. I refer to sheet metal now, not other parts. |
|
|
|
Post by Nacho-RT74 on Jan 21, 2017 21:44:45 GMT -5
he got a really weird 73 kind hood with Ram induction cutout. This points out to a replacement hood
|
|
