|
Post by 73ElectricBlue on May 2, 2008 13:39:47 GMT -5
Who or What ditributor do you all recommend for full and half replacement rear quarters?
|
|
|
Post by curtisc on May 2, 2008 15:20:59 GMT -5
|
|
|
Post by 73ElectricBlue on May 2, 2008 15:27:51 GMT -5
I see they are listed at $209. That must be just a half quarter from the seem down. I'll have to give them a call. Thanks.
|
|
|
Post by superduperbee on May 2, 2008 19:11:03 GMT -5
Stay away from the cheap ones on ebay unless you're a real good bodyman. They don't fit well, have style lines missing and lines that don't belong. you can see my car on 71superbee.com and see what I had to do to use them. Basically chopped them up into patches, then welded in a piece at a time.
|
|
|
Post by Nacho-RT74 on May 2, 2008 23:36:48 GMT -5
|
|
|
Post by 73ElectricBlue on May 3, 2008 19:16:48 GMT -5
I checked out those quarters on Moparts. Look nice but too far for me to travel. Might have to try the tabco's.
|
|
|
Post by 73ElectricBlue on May 3, 2008 19:19:12 GMT -5
It does look very unanimous for the tabco panels.
|
|
|
Post by cjskotni on May 6, 2008 8:55:14 GMT -5
I have heard tabco is good. Herbs is also good from what I hear. in staying away from the cheap (120$) quarter panels on ebay. I bought a set...you get what you pay for. My body guy said they were only worth the sheet metal they were made from. They didn't fit....no complex curves....just bent sheetmetal...and thin at that.
|
|