gip63
Forum Regular
Posts: 257
|
Post by gip63 on Feb 27, 2018 20:33:25 GMT -5
After 4 tries finely got Cragars put on. Iām very pleased with the difference they make in looks, they were worth the wait. Wheels can really change the way a vehicle looks. The hood pins look really good, I would like to find some like that for mine. Would like to have those that you push in and turn but they are high.
|
|
DynoDave
CO-ADMINISTRATOR
Motown Mopar-Wizard
Posts: 11,169
|
Post by DynoDave on Feb 28, 2018 8:40:22 GMT -5
Beautiful day here in NY today so I just took out the Super Bee for a ride. One of my friends gave me the lettering for Christmas, just installed: View Attachment * * FYI...I had to delete my own post due to an error, and when I did, it took someone elses with it. Sorry about that.
|
|
|
Post by brigond on Oct 5, 2018 0:58:04 GMT -5
Nothing spectacular but I'm working on tediously cleaning out the area between the radiator and the headlights. Going to get it all ready for paint and then at some point I will do the actual engine compartment. The Dremel is your friend! Also using Hoppe's 9 to give it a wipe after the dremel.
|
|
|
Post by hanks73340 on Oct 9, 2018 8:33:57 GMT -5
Very nice job. Looks ready to paint.
|
|
|
Post by brigond on Oct 9, 2018 15:19:24 GMT -5
Very nice job. Looks ready to paint. Thanks, a little at a time and things get done.
|
|
|
Post by brigond on Oct 9, 2018 15:28:15 GMT -5
A little more . .. I had some (hammered ) paint laying around, the color was close so why not . I sprayed lightly to avoid the hammered affect as best as i could. Its not an often seen part anyway. Oh! a safety tip for wire wheeling parts... Dont wear rubber gloves. A gauze pad in pic #1 . The wire wheel grabbed the glove and twisted around the wheel, pulling it into my arm. My loss is your gain. š
|
|
DynoDave
CO-ADMINISTRATOR
Motown Mopar-Wizard
Posts: 11,169
|
Post by DynoDave on Oct 9, 2018 19:05:20 GMT -5
Those look very nice.
Sorry about the injury.
|
|
|
Post by brigond on Oct 19, 2018 20:45:30 GMT -5
|
|
|
Post by brigond on Oct 19, 2018 20:47:39 GMT -5
Im going to wrap the harness with new tape.
|
|
|
Post by 71se3834v on Oct 21, 2018 20:20:56 GMT -5
Nice job Bri! Here's my list accomplishments this year: Spring: Installed eccentric upper control arm bushings and an adjustment to the power steering gearbox so she's aligned and runs down the road straight. Summer: Get the AC up and running including a new ac compressor shaft seal, unstick the heater bypass door and replace the heater temp control valve. Fall: Install a new voltage regulator and upgrade to a Pertronix electronic ignition.
It was a good year with a lot of cruises and shows attended. The Charger is taking a nap while I run the gas out of my Galaxie (It's my fall cruiser). The Charger will come out to be filled with ethanol free fuel before being put away for the winter.
|
|