|
|
Post by jeremy on Apr 7, 2023 23:29:00 GMT -5
Asking specifically for 72.
|
|
|
|
Post by Nacho-RT74 on Apr 8, 2023 1:50:29 GMT -5
The ones running to calipers, definitely diff. Can’t tell about MC to Dist block lines. I’m assuming since dist block (combination valve) must be diff, some lines are too.
However on the Disc-o-tech article, Rick doesn’t make mention to the MC and combination valve lines, just the lines running to Calipers
|
|
|
|
Post by jeremy on Apr 8, 2023 9:01:23 GMT -5
Hard lines to calipers or just the soft rubber lines? Now that I think about it, how could the hard lines be different? If they are a different size they won't fit in the clamps on the axle tubes, for instance.
Then again those lines would go directly to the rear calipers, so they must be bent different at least.
|
|
|
|
Post by Nacho-RT74 on Apr 8, 2023 9:09:05 GMT -5
Soft lines… between body and caliper
I’m talking about front lines to front disc. Rear disc brakes are a very diff story, since no stock pieces are available… except from Imperials?
|
|
|
|
Post by 71se3834v on Apr 9, 2023 8:44:55 GMT -5
Take a look on Inline Tube's website to see if they list a different part number for the 2 sets.
|
|
|
|
Post by jeremy on Apr 9, 2023 9:28:23 GMT -5
They do.
I've got a thread going on forbbodiesonly and the opinion so far is that the drum brake lines will be fine.
|
|
