|
|
Post by son7771 on Oct 4, 2008 22:31:58 GMT -5
The motor works fine it does move headlights up and down but the relay in the car just keeps clicking away if they are up or down. I am thinking about just wiring a switch to do this manually if I cant figure this out. Thanks any help is great.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 4, 2008 22:54:02 GMT -5
|
|
|
|
Post by 71deputy on Oct 6, 2008 11:02:48 GMT -5
CONNECTED TO THE RELAY IS A CIRCUIT BREAKER- IT COULD BE TOAST!
|
|
|
|
Post by quapman on Oct 8, 2008 16:19:06 GMT -5
You might have the wrong motor. There were two or three variations and they all have different stop points at the end of the stroke (open/closed). Also, if you have an early 71, the rubber bump-stops that the doors close against might be too fat. Later 71's and 72's have a flatter bumper which allows more travel so that the motor contacts disengage properly. Otherwise, the motor just wants to keep going. This is a problem on my 71 and I just have not had the time to fix it properly.
My plan is to carefully cut off the "dome" of the bump-stops with a razor blade. Everything worked fine with the motor out by itself. If you try the motor test, Just make sure it's grounded and you have a tight grip on it.
Steve
|
|
