|
|
Post by 72charger on Apr 11, 2009 15:41:55 GMT -5
Can you take the headlight motor off without taking off the front bumper? I haven't looked at it yet so I don't know if you can, that is why I ask. I am thinking I will take it off and disassemble it myself but I don't know if I can take it off without removing the bumper. Can someone please let me know so that I don't have to figure it out on my own. Thanks. Matt
|
|
brock
Major Website Supporter
MEGA KILOVOLT-MASTER
Posts: 3,459
|
Post by brock on Apr 11, 2009 16:22:09 GMT -5
Yes you can remove the headlight door motor without removing
the bumper. First, disconnect the torsion rod from the headlight
doors. Disconnect the wires & the 3 bolts that hold it to the
hood latch brace. Fish it out.
|
|
|
|
Post by 72charger on Apr 11, 2009 17:28:37 GMT -5
Thanks Brock, your knowledge is greatly appreciated. Hopefully I can free it up then and be able to open my headlight doors
|
|
|
|
Post by 72charger on Apr 26, 2009 15:41:40 GMT -5
Does the torsion rod just sit in the pockets or is it held in by a pin or something. Looking at it I am thinking that it just sits in the pocket but I want to make sure.
|
|
brock
Major Website Supporter
MEGA KILOVOLT-MASTER
Posts: 3,459
|
Post by brock on Apr 26, 2009 19:08:55 GMT -5
Once you get the clamp out of the way, the rod just sits in the
pocket. You can test this by trying to separate them by hand.
|
|
|
|
Post by 72charger on Apr 26, 2009 20:43:35 GMT -5
That is why I asked, the rod is rusted into the pocket so it is going to take some force to get it out and I wanted to make sure that there was nothing else holding it in. Thanks Brock.
|
|
brock
Major Website Supporter
MEGA KILOVOLT-MASTER
Posts: 3,459
|
Post by brock on Apr 27, 2009 17:45:36 GMT -5
Might try dousing them with Liquid Wrench or S'OK or your choice for a day & reapply 24hrs later  |
|
