Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 1, 2007 19:47:59 GMT -5
Dont know about that, but I see your drivers side lense is a upside down passenger side lense.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 1, 2007 20:05:05 GMT -5
Bingo. That really kind of ticked me off. $375 for a set of lenses is serious coin. I thought PG should at least have the decency to let their buyers be aware of that fact. I sent them messages via ebay about it, but they never responded. Guess I should have typed those messages in Chinese. I gave the set I bought to my best friend when he got back from Iraq.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 1, 2007 20:36:31 GMT -5
Agreed. Its nice to have them available. PG puts out a lot of much needed parts. They even have 73-74 tail lenses now. (expensive) sooner or later, I will buy me another set.
|
|
|
Post by konigcharger on Jun 3, 2007 17:05:05 GMT -5
hey matt, it appears you are use the 73/74 style bracket in between the bezels, it is too long and binds in the center. throwing everything outta whack mine fit perfect
|
|
|
Post by Nacho-RT74 on Jun 4, 2007 13:30:19 GMT -5
HAHAHAHA BINGO.. I'm agree with konig... I did know about the license plate "stopper" bracket difference, being 71/72 shorter than 73/74... but forgot to notice about that and state. My bracket was broken when I got the car and I installed a 71 one for a while I find the right 74 one. 73/74 is longer and a little bit raisered as far I can reacll right now. That bracket is pushing your assembly I think.
So Matt just to let you know I have a 71/72 available now ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 4, 2007 23:08:43 GMT -5
I do not know if it is true or not, but I have seen ebay ads that indicated that the spacer bar for the R/T and Rallye tail lights was different than the spacer bar for standard tail lights. One of these days, if I can find my 72 parts numbers CD, I will look that up and see if it is true.
|
|
|
Post by konigcharger on Jun 5, 2007 0:31:23 GMT -5
looks like just a hair under 12 1/2 inches but its hard to be exact with it on the car
|
|
|
Post by konigcharger on Jun 5, 2007 0:49:31 GMT -5
i was just comparing the two and i'm thinking if you cut it at an inch from the stopper on both sides then ground the ends down, about a 1/4 inch in and about an 1/8 down, then ground the front an 1/8 back it would work does that make any sence?
|
|