|
Post by wh23g3g on Oct 1, 2007 19:32:54 GMT -5
I got an NOS hazard flasher bracket today. I know it goes on the ash tray. Does it go on the side or on the top? There is a slot on the side, which is where I put it for now. But there is also a slot on the top. I'm thinking I may have had a cigar lighter bulb, but I don't know what I did with the harness. Does the bulb go on the top? And I've got seat belt relay bracket on the way. Can you tell me where it will mount?
|
|
|
Post by Nacho-RT74 on Oct 1, 2007 23:17:01 GMT -5
ashtray one is the turning signal... is on the side JUST RIGHT at that slot.
yes, bulb and socket is on top.
seatbelt relay... attached at a side of glove box... below dash frame you'll find holes to screws. That same area is used to the lights on buzzer
|
|
|
Post by Nacho-RT74 on Oct 1, 2007 23:25:47 GMT -5
|
|
|
Post by wh23g3g on Oct 1, 2007 23:47:48 GMT -5
I know there is a switch on the right side of the glove box on the metal dash frame in back that looks similar to the A/C switch. That's for the seat belt. Does the seat belt relay and lights on buzzer mount to the bottom of the metal dash frame where it can be seen or behind it? Where can I get a photo?
|
|
|
Post by Nacho-RT74 on Oct 2, 2007 10:56:41 GMT -5
|
|
|
Post by wh23g3g on Oct 2, 2007 17:36:57 GMT -5
I got the seatbelt relay today and I found where it mounts thanks to the picture you have. I'm only waiting on the lights on buzzer and then everything under the dash will be plugged in. I think I found my ashtray bulb holder today, but no wire. Does it have a clip that goes around it shaped like a horseshoe? I checked on the white wire I cannot figure out and it's white all the way down. Should I just leave it unplugged.
|
|
|
Post by Nacho-RT74 on Oct 2, 2007 23:22:07 GMT -5
where does arrive that wire ?
shame I'm some far away, because I have couple of those buzzers and relays
yes, socket does have an Omega Shape bracket to be inserted on slot. wire as far I remember is part of socket.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 19, 2007 11:17:55 GMT -5
maybe this helps with the rear of ash tray questions
|
|
|
Post by Nacho-RT74 on Oct 20, 2007 16:52:20 GMT -5
that for those with plastic enclosure and the stud on top, like seatbelt buzzers... metallic ones could use the same hazzard metallic bracket
|
|