|
|
Post by cjskotni on Jun 21, 2014 9:05:05 GMT -5
Guys,
I have a set of new 1/4" return and vapor lines for my 1973 Charger. I am pretty sure the return line will pretty much follow the fuel line all the way from the sender to the engine bay however, I want to be sure how this and the vapor line should be routed/clipped.
Can anybody here with a 73/74 Charger post pics or even describe how these two lines are secured? Thanks!!
|
|
|
|
Post by cjskotni on Jun 22, 2014 15:02:56 GMT -5
Even a description would be nice. I think I **may** have the vapor line correctly placed by the vapor separator near the tank. I have it going in back (tank side) of the shock mount and then loops under right near the center of the car under the separator.
My questions are:
- Does the vapor line run right along the rocker with the fuel supply/return lines?
- Do the fuel supply and return share the same double clip and then use S-clips to secure the vapor to one of them? Which one?
- Does the vapor line at any point from the torsion x-member back (besides at the tank) have a separate path than the main/return line?
Any description or pics would be nice. I really want to do this right the first time instead of guessing.
Thanks in advance!!
|
|
|
|
Post by odzking on Jun 23, 2014 11:12:12 GMT -5
Does this help at all?   |
|
|
|
Post by cjskotni on Jun 23, 2014 19:20:54 GMT -5
Unfortunately this isn't what I need. I know where everything hooks up. What I need are pics/description of physically where/how the vapor and return lines clip to the body. I was hoping somebody here had some pics of the underside of the car where I might be able to see this. |
|
|
|
Post by 1973charger on Jan 31, 2023 15:13:32 GMT -5
Does anyone know where I can buy a vapor/liquid separator? Then one in the back of the car by the tank.
|
|
