|
|
Post by doctorpimp on Aug 22, 2007 15:01:24 GMT -5
Is there a socket/terminal end repair kit for the 1973 front side marker lights available? OR... Does anyone have an extra one from an old harness??? One of the contacts is missing in mine... Please, Nacho what does your parts manual say?  |
|
|
|
Post by doctorpimp on Aug 22, 2007 20:53:17 GMT -5
I called the dealer, and as usual without a part # they were no help.
When did the stop using them? In the '90's? what models?
Next stop is a junk yard, but there aren't any close to me...
|
|
|
|
Post by doctorpimp on Aug 23, 2007 10:46:32 GMT -5
Yep. That was my first stop, then here and then dc.com... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 25, 2007 21:42:13 GMT -5
I used to pull and sell quite a few side markers off of junkyard cars. You can get the red ones off the rear of 80`s Omni/Horizon and the amber ones off of the front of trucks and the front of Daytonas. If the lenses are the same, it would be fair to assume that the pigtails are also. I more than likely have some or can easily get one. Given the cost of shipping to Canada, finding one local is a better idea.
|
|
|
|
Post by Jer on Aug 26, 2007 1:09:00 GMT -5
I can give you the only 3 numbers that showed up in my 1972 Parts Catalog: from what everyone else is saying, they should work in your 73 (if you can find them). For Chargers: (sometimes there's a zero in front of these numbers) SOCKET:................3513 686 w/WIRE:................3588 314 CONTACT,INSULA- TOR & SPRING PACKAGE, socket...2983 322 I don't have a clue what that last part number package consists of, but since nothing else is listed for Chargers (Code W) in the book--other than lens numbers--I thought I'd throw all 3 of the numbers at ya, and maybe they'll help out. I typed them in exactly like they are in the catalog. Also, I don't know about the pigtails (wiring) but Columbiaparts; Mopar9999; Frederickdodge; thomas-j-sestak-autoparts; and fmmpar are some ebay sellers I've been buying NOS and Repo parts from. For reference books, als4406cuda and irvb have provided just about all that I've needed in getting my SE back together...in fact I think irvb was who I bought the Parts Catalog from. I'm not a walking/talking Ebay advertiser, but since I've spent a lot of time rootin out all these sellers (and a couple of dollars too, so far  ), I might as well "spread the wealth" and share it. I've learned about a lot of suppliers, restorers, etc., from this forum already, so it all evens out in the wash. Jerry |
|
|
|
Post by Nacho-RT74 on Aug 26, 2007 14:50:40 GMT -5
I'm agree, that socket and pigtail was used THE SAME ALONG THE YEARS... the pictured one will work to you and is the same pic used by ALL sellers. Will check PN later
|
|
|
|
Post by doctorpimp on Aug 28, 2007 23:21:59 GMT -5
Thanks all  I managed to track down a used one. |
|
), I might as well "spread the wealth" and share it. I've learned about a lot of suppliers, restorers, etc., from this forum already, so it all evens out in the wash.
