Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 25, 2012 21:50:39 GMT -5
Finally had my Charger out of the garage, installed Weld draglite rims and new tires and also replaced the rad with a redone 3-core and new fan shroud. Shouldn't have too much trouble with the summer heat this year hopefully
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 25, 2012 21:51:42 GMT -5
Here's the new rad:
|
|
DynoDave
CO-ADMINISTRATOR
Motown Mopar-Wizard
Posts: 11,242
|
Post by DynoDave on Mar 26, 2012 6:21:02 GMT -5
Looks good. I like the overflow bottle.
|
|
|
Post by odzking on Mar 26, 2012 7:46:30 GMT -5
We commented on that at Moparfest last year, I like it. Good to hear from you Rock. Looking good.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 28, 2012 12:25:11 GMT -5
I now have a proper overflow bottle for the car, but I have had so many comments and laughs over that JD bottle that I'm not sure I want to remove it. Took the car out on the street last Sunday, no coolant or transmission fluild leaks and the motor purred along at 180 degrees. I think my cooling issues might be at last over with.
|
|
|
Post by Nacho-RT74 on May 11, 2012 12:52:50 GMT -5
need to update mine, and with pics, but haven't had time... already mounted: new tires ( 255/60-15 indys ) new front center bumper filler ;D soon: - new brakes rotors ( drilled and slotted ), ceramic pads, caliper piston and seals... new rear shoes ( semimetallic ) and springs kit -Pushrods ( smith brothers ) -coming back to Chromed MP module ( giving a new chance to MP ) -new radiator hoses -new engine gas lines -new spark plug brackets on passeneger side ( had missed all those ) -new spark plug wire heat shields ( both sides ) -new alternator wires bracket -new preheat shield studs Later... 4 corners fillers some other stuff arrived. -Orange module -MSD module with ECU plug ( old school remanufactured by MSD back in 88 ) thats all I can recall ( Charger related ) right now
|
|
mrhws
Been Here A While
Posts: 784
|
Post by mrhws on May 12, 2012 7:38:03 GMT -5
Wearing those tires out now, aren't you?
|
|
|
Post by Nacho-RT74 on May 12, 2012 22:33:35 GMT -5
Is my driver so will worn out the regular use. Dunno if will make some burnout.
FORGOT TO SAY some other stuff arrived.
To be added soon: -Transgo TF2 kit
to be added when body job time arrives ( which won't be so far from now ) -Plymouth AMD deck filler panel -Top Catwiskers glass weatherstripes. -Vertical quarter seal
also bought, Refurbished Anco wiper blades, pre heater tube between heating shield and air purificator ( both as spare )
|
|
|
|
Post by Nacho-RT74 on May 13, 2012 13:47:32 GMT -5
(laughing out loud) GOTCHA!... still haven't gone to my GF place with new tires.
|
|